Ubuntu PPA Bitcoin Cash Node

BCH Unlimited Ubuntu PPA repo updated to version 1.9.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.9.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v2.0.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://old.reddit.com/btc/comments/ih2eyt/bch_unlimited_190_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.9.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
To solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.9.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.9.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v2.0.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://old.reddit.com/btc/comments/ih2eyt/bch_unlimited_190_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.9.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
To solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to Bitcoincash [link] [comments]

Bitcoin Cash Node Ubuntu PPA repository is available

The Bitcoin Cash Node Ubuntu PPA repository has been set up to serve version 0.21.0 and is available at:
 
https://launchpad.net/~bitcoin-cash-node/+archive/ubuntu/ppa
 
To install
 
sudo add-apt-repository ppa:bitcoin-cash-node/ppa sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
NB if you have installed other Bitcoin Cash clients via PPA, it would be better to uninstall those binaries and remove their repository, eg:
 
sudo apt-get remove bitcoind bitcoin-qt bitcoin-tx sudo add-apt-repository --remove ppa:bitcoin-abc/ppa 
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to btc [link] [comments]

Bitcoin Unlimited 1.7.0 has just been released

Download the latest Bitcoin Cash compatible release of Bitcoin Unlimited (1.7.0, October 11th, 2019) from:
 
https://www.bitcoinunlimited.info/download
https://github.com/BitcoinUnlimited/BitcoinUnlimited/releases/tag/bucash1.7.0.0
 
This is a major release of Bitcoin Unlimited compatible with the upcoming protocol upgrade of the Bitcoin Cash network. You could find November 15th, 2019 upgrade specifications here:
This is list of the main changes that have been merged in this release:
 
Release notes: https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/dev/doc/release-notes/release-notes-bucash1.7.0.md
 
PS Ubuntu PPA repository is currently being updated to serve for 1.7.0
(*) if you were using BU with -txindex, after the fist session after the upgrade the database where the index are stored will be upgraded to a new format. During this migration RPC command will return an error message saying the txindex is syncing. The lasting of the migration process depends on the machine where BU is installed.
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:

 

https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash

 

This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):

 

sudo apt update
sudo apt upgrade

 

To install

 

sudo add-apt-repository ppa:bitcoin-unlimited/bucash
sudo apt-get update
sudo apt install bitcoind bitcoin-qt

 

starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the `amd64` architecture. To install it just execute this command:

sudo apt install electrscash

 

See the official announcement and the release notes for more details:

https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/

https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md

 

Known issues:

On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install `bitcoind`. The error message is the following:

The following packages have unmet dependencies.
bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable
E: Unable to correct problems, you have held broken packages.

Package libgcc-s1 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

It seems like [libgcc-s1](https://packages.ubuntu.com/focal/libgcc-s1) which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.

 

(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":

E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited'
N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.
Do you want to accept these changes and continue updating from this repository? [y/N]

 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to Bitcoincash [link] [comments]

Bitcoin Unlimited 1.7.0 has just been released

Download the latest Bitcoin Cash compatible release of Bitcoin Unlimited (1.7.0, October 11th, 2019) from:
 
https://www.bitcoinunlimited.info/download
https://github.com/BitcoinUnlimited/BitcoinUnlimited/releases/tag/bucash1.7.0.0
 
This is a major release of Bitcoin Unlimited compatible with the upcoming protocol upgrade of the Bitcoin Cash network. You could find November 15th, 2019 upgrade specifications here:
This is list of the main changes that have been merged in this release:
 
Release notes: https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/dev/doc/release-notes/release-notes-bucash1.7.0.md
 
PS Ubuntu PPA repository is currently being updated to serve for BUcash 1.7.0
submitted by s1ckpig to Bitcoincash [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to btc [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to Bitcoincash [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

Bitcoin Unlimited 1.7.0 has just been released

Download the latest Bitcoin Cash compatible release of Bitcoin Unlimited (1.7.0, October 11th, 2019) from:
 
https://www.bitcoinunlimited.info/download
https://github.com/BitcoinUnlimited/BitcoinUnlimited/releases/tag/bucash1.7.0.0
 
This is a major release of Bitcoin Unlimited compatible with the upcoming protocol upgrade of the Bitcoin Cash network. You could find November 15th, 2019 upgrade specifications here:
This is list of the main changes that have been merged in this release:
 
Release notes: https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/dev/doc/release-notes/release-notes-bucash1.7.0.md
 
PS Ubuntu PPA repository is currently being updated to serve for 1.7.0
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

Bitcoin Full Node on Ubuntu 18.04

Need help! I feel like I am missing something stupid small here. I am trying to run a Ubuntu based Bitcoin Full node. I am trying to run this on on a VM Box in VMWare ESXi 6.5. I have tried Ubuntu Desktop and Server 12.04, 14.04, 16.5, and 18.04. The VMWare box has been giving 6gb of ram, 1TB of storage, and 4 CPU Cores. All of them seem to have the same problem. They freeze my entire box. Usually, the freeze occurs while syncing headers but could happen even while trying to connect to neighbors.
I uses these scripts to install Bitcoin Core:
sudo apt-add-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install bitcoin-qt
Has anything heard of this before? I feel like I am late to the party but I cannot find a way around this.
submitted by ZukeZamamee to Bitcoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.16.0

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.16.0
This release implement a new HF on Nov 13, see the release notes and ABC HF announcement for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfy, look at this abcbtc's comment that contains the fix:
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/
submitted by s1ckpig to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.16.2

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.16.2
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
submitted by s1ckpig to btc [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.1

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.1
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.2

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.2
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.0

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.0
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

How To Install Bitcoin Core And Multibit Wallet On Ubuntu 14.10 How to mine BITCOIN, LITECOIN, ZCASH, ETHEREUM, MONERO, BYTECOIN on Linux CPU – Ubuntu How to install Bitcoin on Ubuntu 16.04 4. Installing Bitcoin Core on Linux Kdenlive Ubuntu Linux Install

When installed on 64-bit Ubuntu 14.04 system sudo add-apt-repository ppa:bitcoin/bitcoin -y sudo apt-get update sudo apt-get install bitcoin-qt -y bitcoind and bitcoin-qt are crashing, printing: Segmentation fault (core dumped) ~/.bitcoi... Bitcoin has now an officially maintained PPA with a release candidate version of the peer-to-peer daemon and the client.. Bitcoin has a launchpad project i.e. same project status as Unity/Docky/Openshot etc. The maintainer - Matt Corallo - is a major contributor to the official bitcoin.org website.. This will upgrade all versions from 10.04 and later. The Bitcoin Core wallet is available for easy installation for Ubuntu users via a PPA. To add the PPA to the system, first, open up a terminal window. Inside the terminal window, write out the following command. This command will add the official Bitcoin core software repository directly to Ubuntu. sudo add-apt-repository ppa:bitcoin/bitcoin. From here, you’ll need to run the update command ... sudo apt-get remove bitcoind bitcoin-qt bitcoin-tx sudo add-apt-repository --remove ppa:bitcoin-abc/ppa Install Bitcoin Cash Node. If on Ubuntu 16.04 xenial or 18.04 bionic, you need to do some extra steps: sudo add-apt-repository ppa:ubuntu-toolchain-r/test sudo apt-get update sudo apt-get install g++-7 (all Ubuntus) sudo add-apt-repository ppa:bitcoin-cash-node/ppa sudo apt-get update sudo ... For Ubuntu users, there is a new ppa maintained by Matt Corallo which you can add to your system so that it will automatically keep bitcoin up-to-date. Just type. sudo apt-add-repository ppa:bitcoin/bitcoin in your terminal, then install the bitcoin-qt package. BUG FIXES. Re-enable SSL support for the JSON-RPC interface (it was unintentionally disabled for the 0.5.0 release binaries). The code ...

[index] [45868] [29286] [23380] [38722] [25210] [15118] [34774] [34419] [22205] [34270]

How To Install Bitcoin Core And Multibit Wallet On Ubuntu 14.10

Ubuntu -1 Setting up Bitcoin Commands, sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt sudo apt-get install bitcoind sudo blkid sudo nano /etc/fstab ... To install OpenShot on Ubuntu using PPA, run the commands on Terminal: $ sudo add-apt-repository ppa:openshot.developers/ppa $ sudo apt-get update sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt bitcoind Linux terminal new stuff: clear, ll, cd, touch, echo, cat, shutdown www.bitcoinhackers.org To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ... This video will demonstrate how to create an account at minergate and how to mine BITCOIN, LITECOIN, ZCASH, ETHEREUM, MONERO, BYTECOIN using the CPU of Ubuntu linux Command line: BITCOIN:

#